I have absolutely slacked off during the holidays. Also
things haven’t gone exactly to plan on the shoe front. I managed to get a good
few layers on my latex moulds and got them off my Styrofoam shapes and cleaned
up, the pva glue I used as a sealant kind of stuck onto the latex so needed
peeled and scrubbed off. I didn’t realise at the time that because the shoes
had a texture to them the moulds had a texture and when the UTEE was poured in
it would take on this texture and not be the smooth glassy plastic of my test
mould. I spent a really long time melting and pouring making sure the condoms
were suspended throughout the shoes in layers but when I peeled the latex would
off I was so heartbroken. Im going to try and stay positive about the whole
thing and I don’t have the time to start the process all over again, its just
really frustrating that something I spent so much time on isn’t how I wanted it
to be. I think the shoes will work fine on the display I want to make but I don’t
know if they’ll make it to Edinburgh.
Tuesday, 6 January 2015
Saturday, 20 December 2014
Multiples: Latex Moulds
Okay so since last posts stressing out things have taken a change for the better i was worrying about making heat resistant moulds and lecturer Dot suggested latex to me. Ive used liquid latex before but not for mould making but i gave it a try and made a little mould of a coffee jar lid. It took a bit of time and liquid latex smells really bad but i managed to get a nice little thick mould by dipping the latex instead of painting it, which takes ages and ruins any brush you use and speeding the process up with a hairdryer. When i took it home to pour it managed to take the heat really well and there was no problems.
So going on from this little victory ive made some basic shoe shapes using blue styrofoam stuff based on a pair of wedges i already own and im covering these in layers of latex, the really long part. Ive spent about three hours on Thursday and three hours on Friday doing this and now we're on holiday i have latex home with me to do the last few layers which will be done in the spare room with the windows open definately.
| getting set up to paint with latex |
| finished UTEE with condom inside |
So going on from this little victory ive made some basic shoe shapes using blue styrofoam stuff based on a pair of wedges i already own and im covering these in layers of latex, the really long part. Ive spent about three hours on Thursday and three hours on Friday doing this and now we're on holiday i have latex home with me to do the last few layers which will be done in the spare room with the windows open definately.
Friday, 19 December 2014
Multiples: Stripper Shoes
So the idea that ive been considering most as a final piece revolves around the idea of stripper shoes. Im thinking of creating a pair of shoes made of resin or something that is clear and plasticky with condoms suspended inside. I want to take these shoes into edinburgh and have them photographed, on their own or with me wearing them in the older parts of the city, with that juxtaposition of modern day sex work within the city and the historical setting. Ive done a bit of testing in edinburgh to see what the photos might look like, im also going to have to think of how to edit them to get the feeling i want.
Wednesday, 17 December 2014
Multiples: Plaster Moulding Part 2
So finally got to finishing my plaster mould and doing the messy fun part. My clay model was all finished and smoothed down so it was time to put a wall using bendy metal stuff this creates two half moulds. Once thats done its time to don a boiler suit and some fashionable college boots and make up the plaster. Start by chucking the plaster at the clay making sure theres no gaps and no air bubbles getting a thing layer of plaster. he rest of the plaster will stick to this first layer getting thicker until you can just pour and smoothe it on like melty ice cream.
Once dry you have to scrape away a bit of clay to see your bits of metal and pull them out with pliers, once this is done you can run it under the tap which makes the clay expand a bit and the two halfs come away from each other.
| one half of the mould done |
| pulling out the little bits of metal can be tough |
| at the end you still have your mostly intact clay |
Multiples: Alginate Moulding
I know i haven’t finished my plaster mould just yet but im
getting to it. In the meantime we had a new moulding technique in the 3D
workshop, alginate moulding. Alginate is basically the stuff thats used to
mould body parts and faces because its skin safe and relatively quick drying. You
start off by mixing up the powdered alginate at a 50 grams of powder to 100ml
of water ratio. Next you just mix up the powder and water not whipping the
mixture up, you don’t want air bubbles, and it forms a really thick creamy
paste thing. Then you just apply it to the chosen body part making sure to
vaseline any hairy bits.
| The alginate powder and water waiting to be mixed. |
Because i've been looking at shoes i decided to mould my foot, because i might decide to do something with it as part of the brief. It was pretty cold and really annoying to try and keep my foot still for so long, it did this massive twitch on its own halfway through but all in all i got a pretty good mould out of it.
| Getting the alginate between my toes |
| Waiting for the alginate to dry |
| when the alginate is dry mod rock is put over it to create a solid base for the mould |
Multiples: Plaster Moulds Part 1
So you don’t use up a bunch of clay unnecessarily you start by planning the shape of your little sculpture and working out where you can put wood blocks to make the bulk of the shape before covering it in chicken wire and stuffing with paper to get a relatively solid structure. The chicken wire is such a pain to work with so wear gloves!
| The basic outline of my sculpture covered in chicken wire for the clay to stick to. |
After you have this outline you just cover with a bunch of clay making sure theres no jaggy bits of wire sticking out and you can start smoothing the clay down with a damp sponge.
Tuesday, 16 December 2014
Multiples: Second Trip to Edinburgh
I decided to go back to Edinburgh once more to get a bit more research done and see if anything inspired me, i didnt really get to go to places i had originally wanted to like around the lap dancing clubs so i went up that way to get photos of them, but only by day. I also managed to get to the modern art gallery but pretty late in the day to see the Generation exhibit whichi was quite enjoying until we got kicked out.
| Close up of the neon at Babydolls |
| saw this card for club rouge on a windowsill, the closest thing i found to a calling card |
| its funny that neon is displayed on this historic building as well as in the strip clubs |
| from the garden of the gallery |
Subscribe to:
Posts (Atom)